How to Change DNS Settings on an iPhone

Changing the DNS settings on an iPhone can be difficult if you’re unfamiliar with the process. However, it’s not as complex as it may seem. To help you get started, this guide will provide you with step-by-step instructions on how to change DNS settings on your iPhone.

Step 1: Connect to a Wi-fi Network

The first step is to connect to a Wi-Fi network. This can be done by going to the Settings app and selecting the Wi-Fi option. Once there, you can select the network you want to connect to. Once connected, you’ll be ready to proceed with the next step.

Step 2: Open the DNS Settings

The next step is to open the DNS settings. To do this, you’ll need to go to the Settings app and select the “Cellular” option. Once there, scroll down until you see the “Cellular Data Network” option. Tap on it to open the DNS settings.

Step 3: Enter the DNS Server Address

Once the DNS settings are open, you’ll need to enter the DNS server address. This can be found on the website of your ISP or you can use a public DNS server, such as Google’s Public DNS. Once you’ve entered the address, you’ll need to tap on the “Done” button to save your changes.

Step 4: Test Your Connection

The next step is to test your connection to make sure that the changes have been applied correctly. To do this, you can open your browser and try to connect to a website. If the connection is successful, then the changes have been applied correctly.

Step 5: Troubleshoot

If the connection is unsuccessful, then you may need to troubleshoot the issue. This can be done by restarting your iPhone and then trying to connect to the website again. If the connection is still unsuccessful, then you may need to check the DNS server settings to make sure that they are correct.

In conclusion, changing the DNS settings on an iPhone is not as difficult as it may seem. By following the steps outlined in this guide, you’ll be able to change the DNS settings on your iPhone without too much difficulty. Remember to always test your connection after making any changes to make sure that the changes have been applied correctly. If you encounter any issues, then you may need to troubleshoot the issue.