How to Eject Water from Your iPhone

If you have an iPhone, you’ve probably had it get wet at least once. Whether it was an accidental drop in the pool or a spill on the table, water and iPhones don’t mix. Water can cause a lot of damage to your phone, so it’s important to know how to properly eject water from your iPhone.

Step 1: Power Off Your Phone

The first step in ejecting water from your iPhone is to power it off. This will help prevent any further damage from being done to the phone. To power off your iPhone, press and hold the Sleep/Wake button until the red slider appears. Then, slide the slider to turn off the phone.

Step 2: Remove the Battery Cover

The next step is to remove the battery cover from your phone. This will allow the water to escape from the phone and will prevent it from causing any further damage. To remove the battery cover, use a flat-head screwdriver to carefully pry off the cover.

Step 3: Dry the Phone

Once the battery cover is off, you should dry the phone as much as possible. This can be done by using a soft cloth to wipe away any water on the phone. Make sure to get into all the nooks and crannies of the phone to make sure all the water is removed.

Step 4: Place the Phone in a Bag of Rice

After the phone is dry, the next step is to place it in a bag of rice. Rice is a great material for absorbing moisture, so it will help to absorb any water that is still in the phone. Place the phone in a bag of uncooked rice and seal it up.

Step 5: Leave the Phone in the Rice for 24 Hours

After the phone is in the bag of rice, you should leave it there for at least 24 hours. This will give the rice time to absorb the remaining moisture in the phone. After 24 hours, you can remove the phone from the bag and check to see if it is still wet.

Step 6: Reassemble the Phone

If the phone is still wet after 24 hours in the bag of rice, you can try to reassemble it and power it back on. Carefully put the battery cover back on the phone and then power it back on. If the phone powers on, then you’re in luck. If not, then you should take it to a repair shop to have it looked at.

Step 7: Take the Phone to a Repair Shop

If the phone does not power on after reassembling it, then you should take it to a repair shop. A repair shop can take a look at the phone and determine if any damage has been done to the phone due to the water. They can also help you get your phone back in working order.

Ejecting water from your iPhone is an important step in keeping your phone in good condition. By following these steps, you can help ensure that your phone remains safe and dry. Be sure to power off your phone, remove the battery cover, dry the phone, place it in a bag of rice, and leave it there for 24 hours. If the phone is still wet, you can try to reassemble it and power it back on. If it doesn’t power on, then you should take it to a repair shop. By following these steps, you can help keep your phone safe from water damage.