Connecting two computers with a LAN cable is an easy way to share files and resources in Windows 10. All you need to do is plug the cable into each computer and follow a few simple steps!
Network cables are one of the most versatile and easy ways to connect two computers together. Whether you want to share files or simply transfer data between two machines, using a LAN cable to connect the two computers is a great solution. In this article, we’ll discuss how to use a LAN cable to connect two computers in Windows 10.
Step 1: Gather the Necessary Equipment
The first step is to gather the equipment you’ll need. You will need two computers, both running Windows 10, a LAN cable, and a network switch (if you are connecting more than two computers).
Step 2: Connect the LAN Cable
Once you have the necessary equipment, the next step is to connect the LAN cable. The LAN cable should be connected to the Ethernet port of both computers.
Step 3: Configure the Network Settings on Both Computers
Once the cable is connected, you will need to configure the network settings on each computer. Start by opening the Control Panel on both computers. Go to the Network and Sharing Center and select “Change adapter settings”. You should see the LAN cable listed here. Right-click on the LAN cable and select “Properties”.
In the “Properties” window, select the “Internet Protocol Version 4 (TCP/IPv4)” and click the “Properties” button. In the “Internet Protocol Version 4 (TCP/IPv4) Properties” window, select the “Use the following IP address” option. Enter a unique IP address for each computer and make sure the “Subnet mask” is the same for both computers. Click “OK” to save the settings.
Step 4: Test the Connection
Once the network settings have been configured, you can test the connection by pinging one computer from the other. Open a command prompt window on both computers. Type “ping IP_address” (where IP_address is the IP address of the other computer) and press “Enter”. If the connection is working, you should see the “Reply from” message.
Step 5: Enable Network Discovery
Once the connection is working, you need to enable Network Discovery on both computers. This will allow the computers to see each other on the network. To enable Network Discovery, go to the Control Panel and select “Network and Sharing Center”. Select “Change advanced sharing settings” and make sure the “Network discovery” option is set to “On”.
Step 6: Share Files and Folders
Once Network Discovery is enabled, you can start sharing files and folders between the two computers. Right-click on the folder you want to share and select “Properties”. Go to the “Sharing” tab and click the “Advanced Sharing” button. Check the “Share this folder” option and click “OK”.
On the other computer, open the “Network” folder. You should see the shared folder listed here. Double-click the folder to access it. You can now copy, move, and delete files in the folder.
Using a LAN cable to connect two computers in Windows 10 is a simple and easy solution for sharing files and transferring data between the two machines. All you need is a LAN cable, two computers running Windows 10, and a network switch (if you are connecting more than two computers). With a few simple steps, you can easily connect the two computers and start sharing files and folders.